Search found 8 matches

by technozen
Thu Aug 06, 2015 10:15 pm
Forum: Technical - Sponsored by Brown & Gammons
Topic: MPi stalling
Replies: 30
Views: 1211

Re: MPi stalling

The ECU would be the last item on my list of suspects, they are well built and don't suffer from poor soldering or dry joints. You can open the case, the aluminium cover is sealed in placed with a bead of mastic so the cover will end up like a sardine tin lid by the time you have finished! The board...
by technozen
Thu Aug 06, 2015 3:52 pm
Forum: Technical - Sponsored by Brown & Gammons
Topic: Mems3 mapping
Replies: 44
Views: 11011

Re: Mems3 mapping

It's a nice piece of kit....

http://www.pscan.eu/
by technozen
Thu Aug 06, 2015 1:51 am
Forum: Technical - Sponsored by Brown & Gammons
Topic: Mems3 mapping
Replies: 44
Views: 11011

Re: Mems3 mapping

The pscan tool works fine for matching the engine ECU to the Pektron SCU. Remember, the learning process is done via the engine ECU, it is told to learn the immobiliser code being presented to it. In this regard it is dumb, it just needs the code to be in the correct format, it doesn't matter if the...
by technozen
Sat Aug 01, 2015 10:54 pm
Forum: Technical - Sponsored by Brown & Gammons
Topic: Mems3 mapping
Replies: 44
Views: 11011

Re: Mems3 mapping

The immobiliser code formats are the same for the 5AS and Pektron SCU (also for the Land Rover 10AS and 27VT), so any MEMS ECU can be security matched to any of these immobiliser modules, although T4 may throw a fit if the
matching is being done via a VIN.
by technozen
Fri Jul 10, 2015 8:58 pm
Forum: Technical - Sponsored by Brown & Gammons
Topic: 5AS tool progress and Pektron wanted.
Replies: 20
Views: 1568

Re: 5AS tool progress and Pektron wanted.

Mark must be able to reprogram the ECU as in the original configuration the instrument cluster was required as it acted as a data bus gateway.
by technozen
Thu Jul 09, 2015 9:14 pm
Forum: Technical - Sponsored by Brown & Gammons
Topic: 5AS tool progress and Pektron wanted.
Replies: 20
Views: 1568

Re: 5AS tool progress and Pektron wanted.

The EWS immobiliser data stream on the 75/ZT is totally different to the relatively simple stream from the 5AS (or 10AS, 27VT or Pektron SCU which are the same), the EWS enabled MEMS3 ECU won't learn the 16 bit 5AS code.
by technozen
Tue Jun 02, 2015 3:22 pm
Forum: Technical - Sponsored by Brown & Gammons
Topic: 5AS tool progress and Pektron wanted.
Replies: 20
Views: 1568

Re: 5AS tool progress and Pektron wanted.

Phil, if you need a loan SCU send me a PM.
by technozen
Tue Jun 03, 2014 11:20 pm
Forum: Technical - Sponsored by Brown & Gammons
Topic: OBD Socket (and details of MGF technical day - June 15th)
Replies: 188
Views: 36961

Re: OBD Socket (and details of MGF technical day - June 15th

A very interesting project! If access to diagnostic equipment will help with your endeavour, I can offer the following... Omitec Omiscan II Blackbox Solutions MSV2 (Uses Windows based software, connects via RS232) Avon Diagnostics interface (Uses windows based software, connects via RS232), this is ...