Search found 91 matches
- Sun Jan 23, 2022 7:47 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Sun Visor Repair
- Replies: 10
- Views: 1080
Re: Sun Visor Repair
Has anyone tried 3d printing the clips ?
- Sat Oct 16, 2021 2:33 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
Re: Missfire
Just to close my bit down ,I changed the lambda sensor before the cat and the problem has gone and the car feels a lot better too. I popped into an exhaust fitting place with the sensor and they managed to get the old one out and fitted the new one with the car up in the air ,it would be very hard t...
- Sun Aug 08, 2021 10:12 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Engine Miss fire and hesitation
- Replies: 12
- Views: 838
Re: Engine Miss fire and hesitation
I had the same problem on my 01 MPI it was the first Lambda sensor before the cat , I bought a replacement and went to a local exhaust center who managed to remove the old one .it needs to be on a lift for access . The car runs better now , Running with it disconnected may cause it to over fuel whic...
- Mon May 03, 2021 8:02 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
- Sat May 01, 2021 4:32 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
Re: Missfire
Ok the missfire is gone with the sensor unpluged , but the idle is at 1200 rpm. MIL light came on again P0135 ,heater bank 1 . Time to change the Lambda sensor ,a 5 minute job . . . . I wonder how much a garage would charge to do it .
- Fri Apr 30, 2021 10:14 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
Re: Missfire
Cheers for that ,I will whip the engine cover off in the morning and disconnect the plug and put a meter on the sensor .I have a TF airbox and 52 mm TB coming plus a front splitter so lots to do .
- Fri Apr 30, 2021 8:54 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: MGF Cat compatability with TF
- Replies: 9
- Views: 560
Re: MGF Cat compatability with TF
The decat pipes are worth -3 bhp so a good way to reduce power on a VVC
- Fri Apr 30, 2021 7:24 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
Re: Missfire
Ok where is the plug for the sensor on the pipes that go to the cat.
- Fri Apr 30, 2021 3:30 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
Re: Missfire
The question is though which one of the 2 sensors ? And is this the cause of the missfire? as that happens before the MIL light comes on . Drives ok and then when you put some power on it hesitates ,if I back off and put the power back on it clears .
- Fri Apr 30, 2021 10:56 am
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
Re: Missfire
Ok it is P0130 ,and I have a ticking noise from around the multiplug midway down the inlet manifold.
- Thu Apr 29, 2021 8:08 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Missfire
- Replies: 15
- Views: 1068
Missfire
HI I have a missfire on my 01 MGF mk2 1.8 mpi. 64k miles If I lift off and then put the power back in it clears but after a while the MIL light comes on ,steady not flashing. I have changed the cam position sensor for a new one , and I can reset the MIL light with a code reader , which comes up with...
- Thu Feb 25, 2021 10:47 am
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: E10 petrol from September 2021
- Replies: 14
- Views: 6635
Re: E10 petrol from September 2021
The French have been using e10 for a few years and my 2001 1.8 mpi runs ok on it , you can smell the difference in the exhaust .
- Fri Jan 29, 2021 1:30 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Bonnet Release Cable
- Replies: 9
- Views: 552
Re: Bonnet Release Cable
If only you know it is there , it would be handy for security checks on the campsites in Le Mans just pop the bonnet and show them we have no beer whilst revving the engine
- Fri Jan 29, 2021 1:25 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: K series clear cam belt cover
- Replies: 24
- Views: 1402
Re: K series clear cam belt cover
Sadly diesel destroyer passed away some time ago. Oh, that's really sad :cry: Chris Tideswell wrote: ↑ Sun Jan 17, 2021 5:15 pm Sadly diesel destroyer passed away some time ago. talkingcars wrote . No, he didn't, Allan is alive and well and living in America, messing around with big V8s.
- Wed Jan 27, 2021 4:26 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Bonnet Release Cable
- Replies: 9
- Views: 552
Re: Bonnet Release Cable
Has any one tried to fix a shorter cable from under the dash ? rover 25 ,45 or other .shorter run and no need to open the engine cover/boot.
- Tue Jan 05, 2021 1:58 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Dehumidifiers?
- Replies: 7
- Views: 725
Re: Dehumidifiers?
You can get silica cat litter ,just put it in your wife's best cotton socks
- Sat Oct 24, 2020 8:38 pm
- Forum: Technical - Sponsored by Brown & Gammons
- Topic: Negative HGF test but still the white exhaust smoke
- Replies: 4
- Views: 378
Re: Negative HGF test but still the white exhaust smoke
Inlet manifold gasket will give white smoke ,check the pugs as well for contamination.
- Mon Oct 05, 2020 10:30 pm
- Forum: General Board
- Topic: `73s` getting into amature radio
- Replies: 6
- Views: 553
Re: `73s` getting into amature radio
The on line course is free
- Mon Oct 05, 2020 12:56 pm
- Forum: General Board
- Topic: `73s` getting into amature radio
- Replies: 6
- Views: 553
Re: `73s` getting into amature radio
Wit 5000 plus members on here I thought there may be one or two amatures ,I have a Cb in the shed not used for a long time ,I also have ships radio licence not a yachty one . Did you try the test James ? if you had a cb you will know some of the stuff already.
Michael M7MTN
Michael M7MTN
- Thu Sep 24, 2020 11:29 am
- Forum: General Board
- Topic: `73s` getting into amature radio
- Replies: 6
- Views: 553
Re: `73`
Ok 50 views but no radio amatures , if any one is interested the foundation exam is now on line due to social distancing and also training courses with Essex Ham. sign up for an online course - and spend a few weeks taking it. https://www.essexham.co.uk/train/foundation-online/ apply to do the onlin...