The MGF Register Forums

You can sell your old cat it will pay for the new one


Sent from my iPhone using Tapatalk

I recently failed the MOT on fast idle with a '99 MEMS2J VVC which is bog standard original fit bar an unidentified SS exhaust fitted this year after the OEM one fell apart. KJS emissions fail 161120.JPG I was expecting to find an air leak when I took the lid off but nothing presents as obvious, no...

I had an advisory last week on my ZS for tyre profiles as the front and rears are slightly different. I bet they flag up the size difference on the F. That’s ignorance on the testers side or he’s being a bit of a .......... . Rules are that the same size and profile must fitted to the same axle. Go...

Well I had to use the spare on "Blue 33" as the N/S/R blew out on the way home from collecting her. Have an MOT booked for 10:00 am tomorrow so we shall see about tyres and whatever they have changed since last year. I had an advisory last week on my ZS for tyre profiles as the front and rears are ...

Does sound. Like the connectors under either the passenger or drivers seat. The connectors in the plug dry out. Pop them apart and put done Vaseline on the pins. The seat belt tensioners can also cause the SRS light Both my 75 and TF do the same thing, usually in the way to the test station lol Sent...

Early 2005 TF Spark. First post on here. With an amber engine warning light sticking on (all seems to run/drive ok) bought a cheap hard wired reader. Powered up ok but won't communicate with vehicle. Works fine on my MK7 Golf! Guess I should try a bluetooth type? recommendations? Pscan looks very g...

Going back about 5 years ago I bought a glass rear screen for my Mgf off somebody called Peter. I now have another Mgf and cant find his details so I wonder if anybody can help me please ..or advise cheapest place to buy another rear screen? many thanks Alan Try MFTF Bitz or MG Mania Sent from my i...

Bad Earth


Sent from my iPhone using Tapatalk

pektron fobs can’t be reprogrammed without the bar code. I think the code can be pulled from the ecu with t4, other than that you need to change the pektron bcu for one with two fobs. Have you got the eka code?


Sent from my iPhone using Tapatalk

I’m looking for the tensioning spring that runs down the side of the Latch


Sent from my iPhone using Tapatalk

The hot/cold control on my TF will only turn half way from cold, I’ve tried to adjust the cables on the valve but no change, has anyone had same and fixed this issue before


Sent from my iPhone using Tapatalk

The cooling system should be vacuumed vacumated before refill, seems like you have air bubbles. Almost all of us have by now emptied and refilled our cooling system, and only the factory and dealers had the vacuum system as far as I have heard. A damn good bleed to get the air out is indeed crucial...

Rob, thanks for the info. Mine is late ( December ) 2004, so has the later loom. Nigel, I'm told that you just need the motors, but I'm sure someone will put me right if that's not the case. Additionally I believe you may need the circuits on the SCU made active - Remobilize did this for me recentl...

Gavin, I am guessing that you have a TF115? :) Yes: you're in luck: the volumetric alarm can be retrofitted (it's plug and play), and you can also re-instate remote central locking, as the loom connectors are all there. :thumbsu: I have an 04 115, what would I need to add central locking Sent from ...