The MGF Register Forums

I have just got one from Browns & Gammons after mine failed last year and had to bodge it with a four way connector as there were none available at the time

https://www.ukmgparts.com/product/mgtf- ... -per000150

I may need to change the hydraulic control unit on my TF 160, can this be done without removing the shaft as I don't want to have to reset the vvc timing. If I unscrew it and remove will the plunger and shaft stay in place?

I fitted a drivers ECU for the passenger side on my tf but it is the early type with Lucas alarm. It was easy to do as all the fittings are there for lhd cars.

I have a pipercross viper which sounds good!

http://i42.tinypic.com/23uy3ww.jpg c0092 (b) 1 sa grey ? 2 sb grey black 3 ok orange pink 4 ob orange black 5 yk yellow pink 6 yb yellow black 7 uk blue pink 8 ub blue black c0098 (A) 4 p purple 6 rb red black 7 lgw light green white 8 b black b = black g = green k = pink lg =light green n = brown ...

do a google search for mgf electrical library

Sounds like the alternator has packed up!

Maybe it has a crack or a hole somewhere?

2000 loom will have rear speaker wires!

There isn't quite enough left on the engine to say whether this is an engine originally from an MGF/TF - if there is a dip stick you can tell. More telling is the engine number. MGF and TF 1.8MPi engines had the numbers starting 18K4F xxx where xxx = Lnn, Mnn, or Pnn (nn being a 2-digit number). To...

I was going to buy that hose but found Rimmer Brothers sold a Goodridge hose made for the MGF so bought that instead! Reading this thread I'm glad I did now!

Couldn't you colour one with some leather/vinyl paint?

Maybe its been swapped for the later version with a level sensor!

I used Trophy springs on offer at Rimmer Brothers!

It is possible to fit the ss kit with the original cables, by cutting the rose joints off and threading the ends!

Someone is in the process of doing it on .org

http://forums.mg-rover.org/showthread.php?t=598226

Could it be the rear brakes sticking?

The Chinese MG3SW uses the ZR/25 facelift dash which has different switch's to the Streetwise dash! They were probably produced by Valeo in France and I would expect production runs of 1000 units!

I thought the Mini ones were identical!

Wing Mirrors!

Unclip it from the wing then twist and release the bulb holder!