Hi guys just wondered if anyone has a locking wheel nut removal tool as my one has just been destroyed by a bone head whome attempted to remove my wheel but did it with an air ratchet instead of by hand resulting in the lugs being mashed up and it shape being damaged it has the no 53 on the end many thanks I'm also after a set of wheel bolts so that I can fit my 11 spokes and also after a stainless set of stainless thread saver bolts and de cat gasket if anyone can help thankyou. All. Photo of wheel nut jobby below
Sent from my iPhone using Tapatal
Mgf. Locking wheel nut tool !
Moderator: redbeard57
- Ianburrows
- Posts: 72
- Joined: Wed Oct 02, 2013 8:11 pm
- MGF Register Region: North West
- Model of Car: Mgf vvc
- Location: widnes cheshire
- talkingcars
- Posts: 5766
- Joined: Tue Mar 09, 2010 10:44 pm
- MGF Register Region: South East
- Model of Car: mk1 VVC
- Location: West Sussex
- Contact:
Re: Mgf. Locking wheel nut tool !
I've pmailed you about removal over on the tbar.
Home to black Alfa 159 3.2 V6 Q4, blue MGZR160, green MGF VVC and grey MGF 1.8i, and red MG Maestro T16.
MGF chatting on the Register and at http://www.the-t-bar.com
MGF chatting on the Register and at http://www.the-t-bar.com
Re: Mgf. Locking wheel nut tool !
If you are able to get to the next Merseyside Meet I would gladly remove the lock nuts for you.
Re: Mgf. Locking wheel nut tool !
I just gave up with these tools after going through 3 I changed my to just standard nuts and removed the locking nuts completely.