Fitting a new cd player

Bass, Treble, CarPuters, adding an after market alarm. It's all in here.

Moderator: Committee Members

Post Reply
woodworm
Posts: 12
Joined: Mon Feb 25, 2013 7:04 pm
MGF Register Region: Midlands

Fitting a new cd player

Post by woodworm » Sun Feb 01, 2015 12:19 pm

Hi
Does anybody know of a company that will fit a new CD player and speakers in my F. And remove the old multi disk changer, radio and speakers. I live in the birmingham area...
Thanks....

User avatar
talkingcars
Posts: 5775
Joined: Tue Mar 09, 2010 10:44 pm
MGF Register Region: South East
Model of Car: mk1 VVC
Location: West Sussex
Contact:

Re: Fitting a new cd player

Post by talkingcars » Sun Feb 01, 2015 1:09 pm

It is an easy DIY job if you know which end of a screw driver to hold.
Home to black Alfa 159 3.2 V6 Q4, blue MGZR160, green MGF VVC and grey MGF 1.8i, and red MG Maestro T16.

MGF chatting on the Register and at http://www.the-t-bar.com

Plezier
Posts: 1643
Joined: Wed Jan 22, 2014 12:08 am
MGF Register Region: Europe
Model of Car: MGF 75th
Location: Ruse Bulgaria

Re: Fitting a new cd player

Post by Plezier » Sat Feb 07, 2015 11:07 am

It's really easier than it looks. I was terrified about doing the one I "Elsie" as there were extra wires hanging everywehre. When she arrived all the sound sytem had been removed, speakers everything but there was a mess of extra wires hanging out and the std DIN plugs had been cut off. It turned out to be easy to sort out and I am no electrian.

"Blue 33" my MPi was as bad as that also had a tracker (defunct) and a car phone wored is which was also defunct:-

Image

Image

Image

So I bought a std din connector and removed all the extra rubbish wire and wired in the std din the plugged the new head unit into it and voila all working.

This is just a bit of the extra wiring that was removed:-

Image

Until I tackled it it was giving me night mares.

User avatar
Helsbyman
Posts: 1189
Joined: Tue Oct 09, 2007 11:07 am
MGF Register Region: North West
Model of Car: MGTF V V C
Location: helsby cheshire

Re: Fitting a new cd player

Post by Helsbyman » Sun Feb 08, 2015 10:53 am

woodworm wrote:Hi
Does anybody know of a company that will fit a new CD player and speakers in my F. And remove the old multi disk changer, radio and speakers. I live in the birmingham area...
Thanks....
halfords :thumbsu:
Bilstein dampers, 4-2-1 manifold, Head work by Sabre,stainless steel under floor pipes, MGMAINA moded alternator bracket,silicon hoses, Torque tamer, JAYLAD servo bracket, Pro race 1.2 wheels
PETROL BY SHELL :D

User avatar
RobboMC
Posts: 1077
Joined: Wed May 09, 2012 1:36 am
MGF Register Region: Eastern Australia
Model of Car: 1999 Mpi

Re: Fitting a new cd player

Post by RobboMC » Mon Oct 29, 2018 1:55 am

Got myself a Kenwood CD player from a MY2002 car, my old tape player is stuffed.

I have found the ICE wiring diagram and there are 3 power supply wires.
radio wiring.docx
(227.36 KiB) Downloaded 145 times
Now I can read a diagram,
fuse 12 is shared with the Clock and footwell lights, therefore the Purple wire must be unswitched supply
Fuse 17 is shared with the oil temp gauge, therefore the Light green/White wire must be switched.

So far so good,

but what is Fuse 8? The diagrams show it's shared with illumination and lights.
Is the Red/Black wire the feed for internal illumination of the player?


Now the for CD unit,
Black is obviously earthed,
and I have Red and Yellow wires.

Anyone got any ideas on which is which???

User avatar
Roverlike
Posts: 99
Joined: Sun Sep 11, 2016 8:08 pm
MGF Register Region: Europe

Re: Fitting a new cd player

Post by Roverlike » Mon Oct 29, 2018 5:50 am

Red/Black wire would be for Radio illumination if you have such connector/wire on the radio. Most probably you do not have it, so forget about it.
Yellow wire on the radio is permanent power for the radio, so that is purple wire from diagram.
Red wire on the radio is switched power, so that is LightGreen/White wire from diagram.

User avatar
RobboMC
Posts: 1077
Joined: Wed May 09, 2012 1:36 am
MGF Register Region: Eastern Australia
Model of Car: 1999 Mpi

Re: Fitting a new cd player

Post by RobboMC » Thu Jan 03, 2019 1:59 am

Turned out the wiring was the easy part.

My cheap cd player had a stuffed laser head.

So I bought a second unit and it turned out to have a stuffed power supply.

So I took both head units apart and used the good cd unit from one and the power supply.radio section from the other
and put one good one back together.

So the 'project' is declared a success and I now have a nice loud and original looking cd player in my car.

Post Reply