what have you done on your mgf today?

[David Dixon]

Put my new 'second hand' 'for the boot recess' MGF Tool kit in...the boot recess, (and righted a wrong after I sold a similiar kit with other MGF stuff thinking I wouldn't have another 'F).

[cavaddict]

Took my roll hoops for stove enamelling. Bright red!

[exlkrs]

Ground all the scabrous rust off the rear subframe with a very angry looking wire brush angle grinder attachment. Very satisfying

[robbie1003]

just driven my pride and joy to skipsea for 6 nights, not missed a beat in all the wind and rain, now shes sat on the paving next our static looking fantastic and a bit mucky, only thing I need to improve is the headlights are a bit poop.

[robbie1003]

Put my new 'second hand' 'for the boot recess' MGF Tool kit in...the boot recess, (and righted a wrong after I sold a similiar kit with other MGF stuff thinking I wouldn't have another 'F).

what exactly is in this boot tool kit?

[David Dixon]

Picture of MGF tool kit, just had a look at the Bay area, currently one up for grabs but missing the foam in the lid and two pairs of latex gloves.

[idrawcad]

Where is it stowed? I have a Trophy as well, didn't even know they had a tool kit. I will go and see if mine has one.

[David Dixon]

This was an MG Rover extra, not supplied with car. Quite a sought after item to have, not the best quality or totally comprehensive. Two on the Bay area in the last few weeks have gone for over one hundred notes.

[adrianclifford]

As much as that !!!, I paid a fiver for mine brand new from B&G's back in 2004, transferred it from the F (along with the chrome boot lid finishers and the engine bay aperture grill and inspection panels).

The tool kit sits in the recess on the boot floor, as has been said, it was never a standard piece of kit just an option.

[Rob Bell]

Nice tool kit! If I'd seen it for a fiver on the B&G stand, I'd have snapped it up! I'm amazed I missed it

Metro brake master cylinder and servo arrived - so I know what I'll be playing with soon

[daz]

head gasket, water pump, tensioner, cam belts associated other gaskets oil seals etc, stainless water pipes, you know just a quick service

Does anyone know if/where I can get replacement stainless water pipes for the back of the engine?

[Rob Bell]

Brown and Gammons Daz. Mike Satur might have them too, but I am not sure?

[mgfsoldier]

Does anyone know if/where I can get replacement stainless water pipes for the back of the engine?

Was some on ebay back along havent checked recently

[MGFantastica]

Just been enjoying driving her, many thanks to all the people who have given replies and support through the forum.......

[purplebargeken]

A drive from Colindale to Enfield and back, an oil and filter change and fitted the door card finally. Found out the door speakers were Kenwood items.

A good day.

[exlkrs]

Hammerited rear subframe and engine bay edges, started to strip front end for easier aces for rust treatment/waxoyl

[robbie1003]

adjusted the o/s headlight as it was a bit low and the lights need all the help they can get, know I shouldn't but im thinking hid upgrade needed, safer than crashing into a tree in the dark.

[exlkrs]

Always do something everyday when I've a project on the go just to keep enthusiasm and progress up, but being on nights I only washed the mud/rubbish off the inaccessible areas of the front bumper and headlights now they are off the car and flushed the radiator.

[Paiceybaby]

Fitted my new soft top and the zandf ecu, good times.

[stuart]

Put the hardtop on...Boooooo!