K&N Air Filter

You can talk about anything here. You'll also find a section with member posted photos of our events here.

Moderator: Committee Members

Post Reply
beefio
Posts: 852
Joined: Wed Aug 13, 2014 7:10 pm
MGF Register Region: Hertfordshire
Model of Car: 2000 MGF VVC BRG
Location: Rickmansworth

K&N Air Filter

Post by beefio » Sun Mar 12, 2017 7:53 am

I wanted a K&N panel air filter for my 2000 MGF VVC VIN number YD515993.

From what I read I needed model 33-2647 so I brought one but it doesn't fit its slightly too big.

Can anyone tell me what model I do need?

The original filter is part number PHE100421

beefio
Posts: 852
Joined: Wed Aug 13, 2014 7:10 pm
MGF Register Region: Hertfordshire
Model of Car: 2000 MGF VVC BRG
Location: Rickmansworth

Re: K&N Air Filter

Post by beefio » Sun Mar 12, 2017 10:15 am

Rimmers even list it as the upgrade option over the PHE100421

http://www.rimmerbros.co.uk/Item--i-PHE100421K__N

User avatar
Helsbyman
Posts: 1189
Joined: Tue Oct 09, 2007 11:07 am
MGF Register Region: North West
Model of Car: MGTF V V C
Location: helsby cheshire

Re: K&N Air Filter

Post by Helsbyman » Sun Mar 12, 2017 2:06 pm

I know the air box was made bigger for the tf yours my be just in the wrong time frame so comes in as a tf not an f.
I doubt K& N did there home work properly when making these filters. I know they made 2 cone filters for the 160 ps engine one for the TF160 and a smaller one for the Trophy
Last edited by Helsbyman on Sun Mar 12, 2017 2:32 pm, edited 1 time in total.
Bilstein dampers, 4-2-1 manifold, Head work by Sabre,stainless steel under floor pipes, MGMAINA moded alternator bracket,silicon hoses, Torque tamer, JAYLAD servo bracket, Pro race 1.2 wheels
PETROL BY SHELL :D

beefio
Posts: 852
Joined: Wed Aug 13, 2014 7:10 pm
MGF Register Region: Hertfordshire
Model of Car: 2000 MGF VVC BRG
Location: Rickmansworth

Re: K&N Air Filter

Post by beefio » Sun Mar 12, 2017 2:29 pm

The box is small not big and the filter is too big by a good 5mm
Last edited by beefio on Sun Mar 12, 2017 3:03 pm, edited 1 time in total.

User avatar
Helsbyman
Posts: 1189
Joined: Tue Oct 09, 2007 11:07 am
MGF Register Region: North West
Model of Car: MGTF V V C
Location: helsby cheshire

Re: K&N Air Filter

Post by Helsbyman » Sun Mar 12, 2017 2:36 pm

Yes but as i said K&N thought you had the bigger box
Bilstein dampers, 4-2-1 manifold, Head work by Sabre,stainless steel under floor pipes, MGMAINA moded alternator bracket,silicon hoses, Torque tamer, JAYLAD servo bracket, Pro race 1.2 wheels
PETROL BY SHELL :D

beefio
Posts: 852
Joined: Wed Aug 13, 2014 7:10 pm
MGF Register Region: Hertfordshire
Model of Car: 2000 MGF VVC BRG
Location: Rickmansworth

Re: K&N Air Filter

Post by beefio » Sun Mar 12, 2017 3:25 pm

I see what your saying but the filter isn't the bigger TF size it's just a bit too big for the mk1 air box.

I'd be amazed if a company like K&N hadn't got the correct measurements and I'm the first person to come across this.

Interestingly I can't see that K&N actually list a panel filter for a 2000 MGF.

Maybe I'm just fitting it wrong but I can't see how it can go in the hole if it's too big...
Last edited by beefio on Sun Mar 12, 2017 3:42 pm, edited 1 time in total.

User avatar
daz
Posts: 968
Joined: Wed Aug 21, 2013 5:58 pm
MGF Register Region: Midlands
Model of Car: mg less :(
Location: Birmingham

Re: K&N Air Filter

Post by daz » Sun Mar 12, 2017 3:31 pm

can you post a picture of it in place?

beefio
Posts: 852
Joined: Wed Aug 13, 2014 7:10 pm
MGF Register Region: Hertfordshire
Model of Car: 2000 MGF VVC BRG
Location: Rickmansworth

Re: K&N Air Filter

Post by beefio » Sun Mar 12, 2017 3:40 pm

Not at the moment as I've put everything back, but will do when I get a chance.

It's basically about 5mm too short and about 5mm too wide.

Can't see how I can fit it wrongly, the standard filter just goes in with no issue so a K&N filter should do also...

So thinking I've just got the wrong size filter but then this is the one that is suggested in multiple places?

beefio
Posts: 852
Joined: Wed Aug 13, 2014 7:10 pm
MGF Register Region: Hertfordshire
Model of Car: 2000 MGF VVC BRG
Location: Rickmansworth

Re: K&N Air Filter

Post by beefio » Sun Mar 12, 2017 3:46 pm

The sticker on the box says 33-2647 but I suppose the wrong filter could have been put inside...

I brought it new from Euro car parts so should be correct.

beefio
Posts: 852
Joined: Wed Aug 13, 2014 7:10 pm
MGF Register Region: Hertfordshire
Model of Car: 2000 MGF VVC BRG
Location: Rickmansworth

Re: K&N Air Filter

Post by beefio » Mon Mar 13, 2017 4:18 pm

Ha and now it all becomes clear...I look on the side of the actual filter and it says 33-2761 and not 33-2647 as it says on the box!

Unbelievable I've been going mad trying to fit it and work out why it doesn't fit...now to return it and get the actually filter I need!

Post Reply