[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4280: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
The MGF Register Forums • Mgf boot rack fixing brackets
Page 1 of 1

Mgf boot rack fixing brackets

Posted: Wed Mar 27, 2024 8:18 am
by tomward
Does anyone know if it’s possible to source the mounting brackets and locking mechanism for the black MG branded boot rack?

It’s the black type with four rubber feet and an attachment on each side.

Alternatively is there an aftermarket fixing kit anyone uses which I can fit?

Re: Mgf boot rack fixing brackets

Posted: Wed Mar 27, 2024 11:56 am
by Geoff.F
E-Bay have a basic no-lock kit for £18. The Black MGR Rack was off the shelf with a MG sticker and twice the cost.
The other Boot Rack was a BMW/MG Stainless Steel Rack that bolts onto the boot lid with strengthening rails underneath. A lock on suitcase was also available. When removed, there are stainless blanks to fit. Not cheap.
Beware.The later MGR copy Racks were chrome plated and quickly rusted. A magnet is required.
In 2005, A Dealership sold off their stock with 50 per cent discount. My SS rack and case have done a lot of miles and kilometres .

Re: Mgf boot rack fixing brackets

Posted: Sun Mar 31, 2024 8:12 am
by tomward
Hi Geoff, thanks for the reply.

This one I have is the black one. Do you know which kit off eBay is this no lock one you refer to?

Re: Mgf boot rack fixing brackets

Posted: Sun Mar 31, 2024 11:04 am
by Geoff.F
Easy. MGF luggage boot rack.

Re: Mgf boot rack fixing brackets

Posted: Thu Apr 11, 2024 9:38 am
by generous_dad
I have a used black MG branded boot rack. It came to me without keys for the locks and a replacement pair of lock is very difficult to source.
A pair of locks with keys is available here:

https://www.ebay.co.uk/itm/294453050358

But the barrel is slightly too long. I put a thick washer around the barrel and it works.
Just in case anyone has the same problem as I had.