5AS tool progress and Pektron wanted.

http://www.ukmgparts.com
Ask the Gurus - Use this board to discuss problems or technical issues you have with your MGF/TF - there's always an expert around to help you!

Moderator: Committee Members

Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.

Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.

Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway! :)

Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
technozen
Posts: 8
Joined: Tue Jun 03, 2014 10:38 pm
MGF Register Region: South East

Re: 5AS tool progress and Pektron wanted.

Post by technozen » Fri Jul 10, 2015 8:58 pm

Mark must be able to reprogram the ECU as in the original configuration the instrument cluster was required as it acted as a data bus gateway.

Post Reply