Mems3 mapping

http://www.ukmgparts.com
Ask the Gurus - Use this board to discuss problems or technical issues you have with your MGF/TF - there's always an expert around to help you!

Moderator: Committee Members

Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.

Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.

Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway! :)

Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
marshal-beej
Posts: 4
Joined: Wed Jan 11, 2017 12:57 pm
MGF Register Region: Midlands
Model of Car: 2002 TF 160 VVC

Re: Mems3 mapping

Post by marshal-beej » Mon Feb 20, 2017 3:03 pm

Sorry to drag up an old thread but I have a quick question about Pscan. Can it code new fobs and read the EKA code from a 5AS as that is my main requirement would also good if it can do the same for a Pektron as I have a couple of friends with Pektrons

User avatar
talkingcars
Posts: 5766
Joined: Tue Mar 09, 2010 10:44 pm
MGF Register Region: South East
Model of Car: mk1 VVC
Location: West Sussex
Contact:

Re: Mems3 mapping

Post by talkingcars » Mon Feb 20, 2017 11:01 pm

It can for the Lucas 5AS system but can't yet for Pektron.

Unless you have the barcode you can't program pektron remotes anywhere.
Home to black Alfa 159 3.2 V6 Q4, blue MGZR160, green MGF VVC and grey MGF 1.8i, and red MG Maestro T16.

MGF chatting on the Register and at http://www.the-t-bar.com

pscan.eu
Posts: 135
Joined: Sun Apr 14, 2013 9:32 pm
MGF Register Region: South East

Re: Mems3 mapping

Post by pscan.eu » Wed Feb 21, 2018 5:34 pm

talkingcars wrote:It can for the Lucas 5AS system but can't yet for Pektron.
Pektron is now supported. I need to update the website to say so.

User avatar
talkingcars
Posts: 5766
Joined: Tue Mar 09, 2010 10:44 pm
MGF Register Region: South East
Model of Car: mk1 VVC
Location: West Sussex
Contact:

Re: Mems3 mapping

Post by talkingcars » Wed Feb 21, 2018 10:55 pm

A year to the day, was that planned?
Home to black Alfa 159 3.2 V6 Q4, blue MGZR160, green MGF VVC and grey MGF 1.8i, and red MG Maestro T16.

MGF chatting on the Register and at http://www.the-t-bar.com

pscan.eu
Posts: 135
Joined: Sun Apr 14, 2013 9:32 pm
MGF Register Region: South East

Re: Mems3 mapping

Post by pscan.eu » Wed Feb 21, 2018 11:03 pm

No it has been out for a while. LE500 (and hopefully TF135) service light reset will be out soon too.
If you want to keep on top of updates then subscribe to this thread http://www.rovertech.net/forum/viewtopi ... 4&t=150495

Post Reply