Hi all
Need to find out if there is a repair panel for lower cill area of rear -side quarter panel mgf mk1 rust has punched hole through and would like repair as opposed to replacing hole rear quarter panel
. Has anyone used the front cill section replacement panel and used it to cut in a section to rear quarter?
Jon lee
Fill repair panel
Moderator: Committee Members
Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
- tail-end-char-lee
- Posts: 57
- Joined: Wed Oct 10, 2007 6:50 pm
- MGF Register Region: South Coast
- Model of Car: 1999
- Bigfootmgf
- Posts: 1281
- Joined: Wed Oct 10, 2007 2:54 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8
- Location: Egham Surrey
- Contact:
Re: Fill repair panel
Sorry Jon not had to do it but a Good Body shop will be able to help!
A Good Body shop should be able to make a replacement piece of metal to replace the rust....
Good Luck!
A Good Body shop should be able to make a replacement piece of metal to replace the rust....
Good Luck!
Paul
Mod's cost money that you don't have or you could have if you did not have mods!
Bigfootmgf youtube Channel
SE MGF Facebook page
Mod's cost money that you don't have or you could have if you did not have mods!
Bigfootmgf youtube Channel
SE MGF Facebook page