ORRIGINAL MG WINDSTOP REMOVAL

http://www.ukmgparts.com
Ask the Gurus - Use this board to discuss problems or technical issues you have with your MGF/TF - there's always an expert around to help you!

Moderator: Committee Members

Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.

Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.

Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway! :)

Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
Post Reply
Terry C
Posts: 10
Joined: Wed Jul 05, 2017 7:22 pm
MGF Register Region: East Midlands

ORRIGINAL MG WINDSTOP REMOVAL

Post by Terry C » Sun Aug 06, 2017 10:02 am

I am about to remove the wind-stop from a donor mgf and though I have the mg instructions on fitting they do not mention the size of the alan key anywhere does anyone know the correct size?

User avatar
nellyandjoo
Posts: 789
Joined: Mon Oct 08, 2007 9:27 pm
MGF Register Region: Somerset & Dorset
Model of Car: MGTF 135
Location: Bower Hinton

Re: ORRIGINAL MG WINDSTOP REMOVAL

Post by nellyandjoo » Sun Aug 06, 2017 11:01 am

It will be a metric size, 6mm if I remember correctly. :thumbsu:
Mid Life Crisis

Terry C
Posts: 10
Joined: Wed Jul 05, 2017 7:22 pm
MGF Register Region: East Midlands

Re: ORRIGINAL MG WINDSTOP REMOVAL

Post by Terry C » Mon Aug 07, 2017 6:01 pm

Many thanks, I have it sorted.

Post Reply