T300 Will it work.
Moderator: Committee Members
Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
-
- Posts: 276
- Joined: Tue Apr 29, 2014 6:13 am
- MGF Register Region: Europe
T300 Will it work.
Hi
Will a T300 read the fault codes on all MGFs and Tfs?
I ask as we have a 2003TF 160 which will not be read by our obd2 reader. Its EML is on
Therefore as we have early mgfs here as well, I would be happy to lay out £100 plus for a T300 if it will read all these .
many thanks for your replies
Will a T300 read the fault codes on all MGFs and Tfs?
I ask as we have a 2003TF 160 which will not be read by our obd2 reader. Its EML is on
Therefore as we have early mgfs here as well, I would be happy to lay out £100 plus for a T300 if it will read all these .
many thanks for your replies
Re: T300 Will it work.
T300+ was able to read codes from Rover cars, but that was some time ago and you should be certain that software version uploaded to T300+ was specific which includes MG/Rover cars. As time goes by new software versions are created and MG/Rover cars slipped from list of supported cars. If you are buying from China I am not convinced they will even be able to tell you which cars present software support.
However, I bought pscan.eu software for laptop/tablet with interface which will read all codes from MG/Rovers and is supported from its creator, adding new functionalities as time goes by. However tgis is MG/Rover dedicated software not supporting any other cars.
See here: http://www.pscan.eu/
However, I bought pscan.eu software for laptop/tablet with interface which will read all codes from MG/Rovers and is supported from its creator, adding new functionalities as time goes by. However tgis is MG/Rover dedicated software not supporting any other cars.
See here: http://www.pscan.eu/
- talkingcars
- Posts: 5771
- Joined: Tue Mar 09, 2010 10:44 pm
- MGF Register Region: South East
- Model of Car: mk1 VVC
- Location: West Sussex
- Contact:
Re: T300 Will it work.
I wonder if there is a fault in the OBD socket in your car Dave as it should be compliant to OBD2.
Home to black Alfa 159 3.2 V6 Q4, blue MGZR160, green MGF VVC and grey MGF 1.8i, and red MG Maestro T16.
MGF chatting on the Register and at http://www.the-t-bar.com
MGF chatting on the Register and at http://www.the-t-bar.com
-
- Posts: 276
- Joined: Tue Apr 29, 2014 6:13 am
- MGF Register Region: Europe
Re: T300 Will it work.
I wonder that as well? How could you check it?
- talkingcars
- Posts: 5771
- Joined: Tue Mar 09, 2010 10:44 pm
- MGF Register Region: South East
- Model of Car: mk1 VVC
- Location: West Sussex
- Contact:
Re: T300 Will it work.
Try the reader on another car.
Home to black Alfa 159 3.2 V6 Q4, blue MGZR160, green MGF VVC and grey MGF 1.8i, and red MG Maestro T16.
MGF chatting on the Register and at http://www.the-t-bar.com
MGF chatting on the Register and at http://www.the-t-bar.com
Re: T300 Will it work.
A 2003 will definitely be EOBD compliant. Make sure that there is a 12V feed to the OBD socket, it could just be a blown fuse.
-
- Posts: 276
- Joined: Tue Apr 29, 2014 6:13 am
- MGF Register Region: Europe
Re: T300 Will it work.
thanks hadn't thought of that. will have a look laterpscan.eu wrote:A 2003 will definitely be EOBD compliant. Make sure that there is a 12V feed to the OBD socket, it could just be a blown fuse.
-
- Posts: 276
- Joined: Tue Apr 29, 2014 6:13 am
- MGF Register Region: Europe
Re: T300 Will it work.
one question which fuse is it?
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: T300 Will it work.
Rover wired their socket slightly differently - I can't quite remember the detail, but it is deficient of a ground pin IIRC - which isn't generally a problem for T4 and many aftermarket EOBD readers, but may be for some...
The T300 will read error codes and clear them. Pscan does this, as well as reading every single ECU in the car (of which there are many more than you'd first think there might be!)
Also, I read somewhere a couple of years ago that the latest releases of T300 weren't reading Rovers properly for some reason? Hopefully that is a bug that has been fixed?
The T300 will read error codes and clear them. Pscan does this, as well as reading every single ECU in the car (of which there are many more than you'd first think there might be!)
Also, I read somewhere a couple of years ago that the latest releases of T300 weren't reading Rovers properly for some reason? Hopefully that is a bug that has been fixed?
-
- Posts: 276
- Joined: Tue Apr 29, 2014 6:13 am
- MGF Register Region: Europe
Re: T300 Will it work.
fuse also runs inside lights which are fine....
can i do anything about the ground pin??
can i do anything about the ground pin??
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: T300 Will it work.
This is the thread you need: http://mgfregister.org/forum/viewtopic.php?f=8&t=15907
Missing ground is pin 5.
The thread above talks mostly about the earlier, pre-EOBD compliant connector, but I have a hunch the same is true of the later Rover connectors too... I haven't had a chance to go through these wiring diagrams to confirm...
Missing ground is pin 5.
The thread above talks mostly about the earlier, pre-EOBD compliant connector, but I have a hunch the same is true of the later Rover connectors too... I haven't had a chance to go through these wiring diagrams to confirm...