Ride height on MGF
Moderator: Committee Members
Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
-
- Posts: 25
- Joined: Sat Jul 04, 2020 1:21 pm
- MGF Register Region: South East
- Model of Car: MGF VVC 2001
- Location: Bexleyheath,Kent
Ride height on MGF
Hi All, is there an optimum ride height for a 2001 MGF? My local garage says my car needs lowering as it’s too bumpy. Any advice will be much appreciated.
Cheers
Strat61
Cheers
Strat61
- Keith Williams
- Posts: 6109
- Joined: Mon Oct 08, 2007 5:25 pm
- MGF Register Region: Midlands
- Model of Car: MGF VVC, Trophy 160
- Location: Coventry
Re: Ride height on MGF
The ride height should be 368mm ± 10 mm at 17°C unless you have a Trophy which is 348mm. This is measured from the centre of the wheel to the wheel arch. Heights are measured on the front wheels only.
Just lowering the height will not alter the ride but may affect your tracking and increase uneven wear on the tyres.
Just lowering the height will not alter the ride but may affect your tracking and increase uneven wear on the tyres.
1998 MGF VVC, 2001 Trophy 160 & 2013 MG6 GT TSE
-
- Posts: 25
- Joined: Sat Jul 04, 2020 1:21 pm
- MGF Register Region: South East
- Model of Car: MGF VVC 2001
- Location: Bexleyheath,Kent
Re: Ride height on MGF
Many Thanks Keith, it pays to ask the people who know.
Thanks again
Larry
Thanks again
Larry
- nigelandjo
- Committee Member & Regional Rep
- Posts: 4916
- Joined: Tue Oct 09, 2007 9:44 pm
- MGF Register Region: Somerset & Dorset
- Model of Car: TF85th,TF135,Trophy
- Location: Berrow
- Contact:
Re: Ride height on MGF
When they say it's bumpy do they mean the ride is firm or bouncy? If it's firm and you feel every bump in the road the suspension spheres may be at the end of their life.
Nigel May
Somerset & Dorset Regional Rep, Membership Secretary, Registrar & Archivist
Email: somerset.dorset@mgfregister.org members@mgfregister.org
MGCC Members register here: https://mgfregister.org/?page_id=319
Somerset & Dorset Regional Rep, Membership Secretary, Registrar & Archivist
Email: somerset.dorset@mgfregister.org members@mgfregister.org
MGCC Members register here: https://mgfregister.org/?page_id=319
- RobboMC
- Posts: 1059
- Joined: Wed May 09, 2012 1:36 am
- MGF Register Region: Eastern Australia
- Model of Car: 1999 Mpi
Re: Ride height on MGF
It's a 2001 car, those spheres are 19 years old, of course they're at the end of their life.
If your garage has suggested lowering will fix the bumpy ride then find another garage!!!
The only thing that will fix your bumpy ride is a spring conversion kit or the replacement spheres offered by Ian Kennedy.
Eventually this will happen and you will have no choice but to replace the suspension:
At 20 years of age, any car that still has spheres is a time bomb waiting to go off,
I was lucky this happened only 10 miles from home, I had been last month 500 miles away in the car
If your garage has suggested lowering will fix the bumpy ride then find another garage!!!
The only thing that will fix your bumpy ride is a spring conversion kit or the replacement spheres offered by Ian Kennedy.
Eventually this will happen and you will have no choice but to replace the suspension:
At 20 years of age, any car that still has spheres is a time bomb waiting to go off,
I was lucky this happened only 10 miles from home, I had been last month 500 miles away in the car
- talkingcars
- Posts: 5766
- Joined: Tue Mar 09, 2010 10:44 pm
- MGF Register Region: South East
- Model of Car: mk1 VVC
- Location: West Sussex
- Contact:
Re: Ride height on MGF
Are they a MG specialist or just a local independent?
With the unusual suspension set up on a F it's worth speaking to someone who knows them. Where in the south east are you?
Home to black Alfa 159 3.2 V6 Q4, blue MGZR160, green MGF VVC and grey MGF 1.8i, and red MG Maestro T16.
MGF chatting on the Register and at http://www.the-t-bar.com
MGF chatting on the Register and at http://www.the-t-bar.com
-
- Posts: 25
- Joined: Sat Jul 04, 2020 1:21 pm
- MGF Register Region: South East
- Model of Car: MGF VVC 2001
- Location: Bexleyheath,Kent
Re: Ride height on MGF
Hi, sorry for the late reply. I am in Bexleyheath Kent.
- Rob Bell
- Committee Member
- Posts: 14425
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: Ride height on MGF
Just replaced the Hydragas spheres on mine (a job I've put off some while). They are the "Kennedy Spheres" - but other folks are available to re-gas the nitrogen (which will *transform* the ride back to what it should be!)
Standard ride height at the front should indeed be 368mm from front wheel centre to wheel arch lip vertically above. Lowered cars (shortened knuckles) typically have a ride height of 340mm. Line pressure in the Hydragas system should be approximately 400 psi.
Standard ride height at the front should indeed be 368mm from front wheel centre to wheel arch lip vertically above. Lowered cars (shortened knuckles) typically have a ride height of 340mm. Line pressure in the Hydragas system should be approximately 400 psi.