wiper motor failure

http://www.ukmgparts.com
Ask the Gurus - Use this board to discuss problems or technical issues you have with your MGF/TF - there's always an expert around to help you!

Moderator: Committee Members

Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.

Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.

Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway! :)

Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
Post Reply
User avatar
Helsbyman
Posts: 1189
Joined: Tue Oct 09, 2007 11:07 am
MGF Register Region: North West
Model of Car: MGTF V V C
Location: helsby cheshire

wiper motor failure

Post by Helsbyman » Tue Feb 23, 2010 2:50 pm

Just a little trick I leaned to late for me as mine is now chips but may help some one
The wiper motor collects water over time so DRILL A LITTLE HOLE IN THE BACK OF IT :thumbsu:
Bilstein dampers, 4-2-1 manifold, Head work by Sabre,stainless steel under floor pipes, MGMAINA moded alternator bracket,silicon hoses, Torque tamer, JAYLAD servo bracket, Pro race 1.2 wheels
PETROL BY SHELL :D

User avatar
Rob Bell
Committee Member
Posts: 14425
Joined: Tue Oct 02, 2007 2:36 pm
MGF Register Region: South East
Model of Car: MGF 1.8i + MGF Shed!

Re: wiper motor failure

Post by Rob Bell » Tue Feb 23, 2010 3:56 pm

Or make sure that water doesn't drop down onto it - the front bulkhead shroud can sometimes be replaced so that it doesn't extend over the top of the motor and protect it from the elements from the grille above (at the base of the RH of the windscreen)

Post Reply