Anyone need any odds and sods (nuts,bolts,wires,etc) from a

[puddlejumper]

Hi
As some of you may have seen, I am breaking an accident damaged TF, before it goes to be cubed, does anyone on here need any odds and sods etc. Nuts bolts wires, connectors etc
Stephen

[jaydoginvasion]

Rubber end caps from the side windows and a temp sender plug would come in useful to me mate.

[Aedlin]

I need the retainer clip for the bonnet stay if u can remove it in 1 piece? It's the little white clip where the bonnet stay sits when not in use... Thanks

[quick_spider]

What year is it again? I could do with the sub-harness from the fusebox to the dash instruments.

[puddlejumper]

Rubber end caps from the side windows and a temp sender plug would come in useful to me mate.

Hi
Sorry I'm using the rubberendcaps on my F as they are missing. Can you pm me a photo of the temp sender
Stephen

[puddlejumper]

I need the retainer clip for the bonnet stay if u can remove it in 1 piece? It's the little white clip where the bonnet stay sits when not in use... Thanks

Hi
Sorry it's missing off the car when I got it
Stephen

[puddlejumper]

What year is it again? I could do with the sub-harness from the fusebox to the dash instruments.

Hi
It's a 53 plate, I'll be taking the binacle and fusebox out during the week and if I can get it out in one piece it's yours
Stephen

[Lodge27]

Hi Stephen,
Looking for a spare wheel and toolkit if available plus passenger side window mechanism.
Regards
Stu

[malcolm64]

Hi Stephen i would be interested in the binnacle when/if you manage to remove it
Malcolm

[radiomarty]

Hi - Im after two of the little metal clips that hold on the sensor connectors ie the locking clips - Marty

[jaydoginvasion]

Sensor plug should look like this

[puddlejumper]

Hi Stephen,
Looking for a spare wheel and toolkit if available plus passenger side window mechanism.
Regards
Stu

Sorry it just had the out of date inflation canister

[puddlejumper]

Hi Stephen i would be interested in the binnacle when/if you manage to remove it
Malcolm

Hi Malcolm
The binnacle is safely removed,

[puddlejumper]

Hi - Im after two of the little metal clips that hold on the sensor connectors ie the locking clips - Marty

Not sure what you are looking for, have you any photos?

[malcolm64]

Hi Stephen would you kindly pm a price you would be looking at thanks Malcolm

[idrawcad]

Hi Stephen,
I am after a bot lid rubber stop, all the screws for the large black plastic cover at the rear of the bonnet compartment, and the little 'knob' that you control the position of the side air vents with, they just pull off. Let me know if you have any of these please.

[50dwill]

Hi have you got 4 wheel nuts.

[Aedlin]

I'm after the bolts for the engine access panel if u still have these?

Sent from my GT-I9505 using Tapatalk 4

[puddlejumper]

What year is it again? I could do with the sub-harness from the fusebox to the dash instruments.

Hi
Now removed, p'm sent
Stephen

[puddlejumper]

Hi Stephen,
I am after a bot lid rubber stop, all the screws for the large black plastic cover at the rear of the bonnet compartment, and the little 'knob' that you control the position of the side air vents with, they just pull off. Let me know if you have any of these please.

Hi Idrawcad
Re the boot lid rubber stop, i'll check tomorrow. All the fixings for the plastic cover are missing, How many of the control knobs do you need?
Stephen