MGF project to go

toobigforanmgf · Post by **toobigforanmgf** » Wed Dec 07, 2022 7:39 pm

After much soul searching and the fact these are not rare, I have decided the MGF project has to go. The fuel pump went, so I started stripping it to see if I could add 4" to the tub length so I could drive it, but got bored and sold the front wings and drivers door, therefore it is now incomplete. It has a good 1800 K-series with no head gasket issues, good G/Box, aircon pump, exhaust, good set of minilites. Subframes / suspension / hubs / halfshafts all ok. It is a P reg, so its an early one.

[/img]https://www.flickr.com/photos/197128954 ... ed-public/[/img] [/img]https://www.flickr.com/photos/197128954 ... ed-public/[/img] [/img]https://www.flickr.com/photos/197128954 ... ed-public/[/img] [/img]https://www.flickr.com/photos/197128954 ... ed-public/[/img]
Make an offer and bring a trailer.
Located in Epsom, Surrey

Post by **Rob Bell** » Wed Mar 22, 2023 7:02 pm

Is this still around? It looks as though it is pre-2001 - is that correct?

Kasper · Post by **Kasper** » Fri Mar 24, 2023 7:23 pm

Doesn’t happen to be a late Mk2 vvc? (MEMS3) if so….

toobigforanmgf · Post by **toobigforanmgf** » Wed May 31, 2023 8:45 am

Kasper wrote: ↑
Fri Mar 24, 2023 7:23 pm
Doesn’t happen to be a late Mk2 vvc? (MEMS3) if so….

Afraid not, it's an early Japanese re-import air.con. 120bhp pre-vvc type

toobigforanmgf · Post by **toobigforanmgf** » Wed Nov 01, 2023 2:10 pm

too many time wasters, local scrappy gets it at the weekend

Post by **Rob Bell** » Tue Nov 07, 2023 2:27 pm

I had no idea this car was still available! Shame - if nothing else, it would have been a great parts vehicle.

Sad that no one was able to take this car from you

[Project Shed started from a base car that was far worse than this!]

Notanumber · Post by **Notanumber** » Wed Nov 08, 2023 1:22 pm

Its sad that no one has taken it on as a restoration project.

That said, I'll buy the column and EPAS gear if you are inclined to strip anything off it before it is weighed in.

Notanumber · Post by **Notanumber** » Mon Nov 13, 2023 12:45 pm

It seems a pity to let it go to the scrappy when there are people here who would be interested in buying it as a cheap project or to use parts for other Fs.

Post by **Rob Bell** » Tue Nov 21, 2023 6:29 pm

Notanumber wrote: ↑
Wed Nov 08, 2023 1:22 pm
Its sad that no one has taken it on as a restoration project.

That said, I'll buy the column and EPAS gear if you are inclined to strip anything off it before it is weighed in.

If you need an EPAS column, drop me a message - I have a spare

Notanumber · Post by **Notanumber** » Tue Nov 21, 2023 11:23 pm

Will do Rob. PM sent

The MGF Register Forums

MGF project to go

MGF project to go

Re: MGF project to go

Re: MGF project to go

Re: MGF project to go

Re: MGF project to go

Re: MGF project to go

Re: MGF project to go

Re: MGF project to go

Re: MGF project to go

Re: MGF project to go