Page 1 of 1
MGF project to go
Posted: Wed Dec 07, 2022 7:39 pm
by toobigforanmgf
After much soul searching and the fact these are not rare, I have decided the MGF project has to go. The fuel pump went, so I started stripping it to see if I could add 4" to the tub length so I could drive it, but got bored and sold the front wings and drivers door, therefore it is now incomplete. It has a good 1800 K-series with no head gasket issues, good G/Box, aircon pump, exhaust, good set of minilites. Subframes / suspension / hubs / halfshafts all ok. It is a P reg, so its an early one.
[/img]
https://www.flickr.com/photos/197128954 ... ed-public/[/img] [/img]
https://www.flickr.com/photos/197128954 ... ed-public/[/img] [/img]
https://www.flickr.com/photos/197128954 ... ed-public/[/img] [/img]
https://www.flickr.com/photos/197128954 ... ed-public/[/img]
Make an offer and bring a trailer.
Located in Epsom, Surrey
Re: MGF project to go
Posted: Wed Mar 22, 2023 7:02 pm
by Rob Bell
Is this still around? It looks as though it is pre-2001 - is that correct?
Re: MGF project to go
Posted: Fri Mar 24, 2023 7:23 pm
by Kasper
Doesn’t happen to be a late Mk2 vvc? (MEMS3) if so….
Re: MGF project to go
Posted: Wed May 31, 2023 8:45 am
by toobigforanmgf
Kasper wrote: ↑Fri Mar 24, 2023 7:23 pm
Doesn’t happen to be a late Mk2 vvc? (MEMS3) if so….
Afraid not, it's an early Japanese re-import air.con. 120bhp pre-vvc type
Re: MGF project to go
Posted: Wed Nov 01, 2023 2:10 pm
by toobigforanmgf
too many time wasters, local scrappy gets it at the weekend
Re: MGF project to go
Posted: Tue Nov 07, 2023 2:27 pm
by Rob Bell
I had no idea this car was still available! Shame - if nothing else, it would have been a great parts vehicle.
Sad that no one was able to take this car from you
[Project Shed started from a base car that was far worse than this!]
Re: MGF project to go
Posted: Wed Nov 08, 2023 1:22 pm
by Notanumber
Its sad that no one has taken it on as a restoration project.
That said, I'll buy the column and EPAS gear if you are inclined to strip anything off it before it is weighed in.
Re: MGF project to go
Posted: Mon Nov 13, 2023 12:45 pm
by Notanumber
It seems a pity to let it go to the scrappy when there are people here who would be interested in buying it as a cheap project or to use parts for other Fs.
Re: MGF project to go
Posted: Tue Nov 21, 2023 6:29 pm
by Rob Bell
Notanumber wrote: ↑Wed Nov 08, 2023 1:22 pm
Its sad that no one has taken it on as a restoration project.
That said, I'll buy the column and EPAS gear if you are inclined to strip anything off it before it is weighed in.
If you need an EPAS column, drop me a message - I have a spare
Re: MGF project to go
Posted: Tue Nov 21, 2023 11:23 pm
by Notanumber
Will do Rob. PM sent