So I'm not a fan of crimp connectors
Moderator: Committee Members
Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
- MaddAussie
- Posts: 754
- Joined: Thu Feb 03, 2011 9:16 am
- MGF Register Region: Somerset & Dorset
- Model of Car: TF160
So I'm not a fan of crimp connectors
I have to fit a couple of electrickery bits to the car. I needed some connectors so had a quick look on the bay of fleas. I stumbled across these bad boys.
Basicly its a ring of solder in a heat shrink tube all you do is strip wire slide connector over one half. Join the two halves together, slide connector over join and apply heat. The solder flows around join and the heat shrink err shrinks.
Job jobed!
Basicly its a ring of solder in a heat shrink tube all you do is strip wire slide connector over one half. Join the two halves together, slide connector over join and apply heat. The solder flows around join and the heat shrink err shrinks.
Job jobed!
TF160 - Bilstiens, Mike Satur 4-2-1, Sports Cat, Quad Daytona, Z and F Tuning Phase 2 Remap showing 177Bhp @ Janspeed RR day and a Big Grin (oh and a glass rear screen and bits of shiny stuff) 85th suspension bits to fit!
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: So I'm not a fan of crimp connectors
That's neat! You'll have to get some and tell us how well they work Mark!
- MaddAussie
- Posts: 754
- Joined: Thu Feb 03, 2011 9:16 am
- MGF Register Region: Somerset & Dorset
- Model of Car: TF160
Re: So I'm not a fan of crimp connectors
Thats my desk! I will hopefully get the remote boot release fitted at the weekend
TF160 - Bilstiens, Mike Satur 4-2-1, Sports Cat, Quad Daytona, Z and F Tuning Phase 2 Remap showing 177Bhp @ Janspeed RR day and a Big Grin (oh and a glass rear screen and bits of shiny stuff) 85th suspension bits to fit!
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: So I'm not a fan of crimp connectors
Look forward to the update!
Re: So I'm not a fan of crimp connectors
Oooh! I could have done with some of them at the weekend pesky lawnmower lead was breaking down at the crimp by the switch .I had to join a new lead to the old one as the switch fitting was bespoke and tamper proof.
- jaydoginvasion
- Posts: 309
- Joined: Sun Mar 02, 2014 11:39 pm
- MGF Register Region: East Anglia
Re: So I'm not a fan of crimp connectors
Could we have a link to these please? I have a few jobs that these would be useful for
- MaddAussie
- Posts: 754
- Joined: Thu Feb 03, 2011 9:16 am
- MGF Register Region: Somerset & Dorset
- Model of Car: TF160
Re: So I'm not a fan of crimp connectors
http://www.ebay.co.uk/itm/100-Mixed-Hea ... 1c3f0bd87d
This is the back I bought there are other types available but these seemed the best.
I may not get to the car on the weekend now as I think I have a kidney stone...
This is the back I bought there are other types available but these seemed the best.
I may not get to the car on the weekend now as I think I have a kidney stone...
TF160 - Bilstiens, Mike Satur 4-2-1, Sports Cat, Quad Daytona, Z and F Tuning Phase 2 Remap showing 177Bhp @ Janspeed RR day and a Big Grin (oh and a glass rear screen and bits of shiny stuff) 85th suspension bits to fit!
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: So I'm not a fan of crimp connectors
Nasty - hope not Mark! Drink plenty!