[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4280: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
The MGF Register Forums • Programming new remote
Page 1 of 1

Programming new remote

Posted: Thu Aug 11, 2022 2:51 am
by RobboMC
Initially I only got one remote and key with the car,
and so with a single 20+ year old remote I'm a bit worried.

Soo..... I have myself a new key blank and new remote from Rimmers.

What is the best way to get the remote programmed?, remembering I'm down under.

I'm guessing any Rover dealer will charge me a decent amount to do the small job,
I feel I'm better off putting that money towards a pscan.

Sooooo... does the pscan allow me to program a 2nd remote?

Re: Programming new remote

Posted: Thu Aug 11, 2022 8:01 am
by Roverlike
Yes, PScan allows you to program second remote.

Re: Programming new remote

Posted: Fri Aug 12, 2022 6:47 pm
by Kasper
Buying a PScan could be cheaper as going to an original dealer with a T4. Allthough there are plenty of MG(T)F owners with their own T4 over here. But I know The Low countries are not around the corner for you.
The P-Scan is very helpfull and will trace most of the usual isssues with your car, not a bad thing to have, evne when not needed for programming a key.

Re: Programming new remote

Posted: Fri Aug 12, 2022 11:30 pm
by talkingcars
IIRC you can program 10 fobs to each car.

When I had 5 cars using the Lucas system I used my pscan to program 2 fobs to each car and another that worked on all of the cars.