Frankienstien is dead all parts must go.

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 8:31 am

Ladies and gents time has got the better of me and I've admitted defeat. My Mk1 F has to go so I'm looking to sell the bits I have and make some cash to pay for a new car I've found. I will add a picture later but its also the car in my profile.

The plan was to completely refurb it, I bought all the parts I needed to convert to MEMS3 with TF 160 ecu
...so looks like a nice mk1 but drives like a 160.

I will keep the entire smokestone interior and Abingdons wheels so the car I buy will have the wheels and interior removed and put up for sale. But as a start this is what I have.

Miltec quad tail stainless steel exhaust with brand new CAT asking £200 ono

The roof in good condition does not leak £60

6 spoke alloys TBC

Rear boot with free style spoiler £60

Doors £30 each

Front bumper £80

Rear bumper £80

Full interior that can be broken down for plastics and seats / door cards. TBC

I also have a full ECU set from a MG TF 160 to convert any model to MEMS 3 includes engine loom ignition pack cam sensor all the bits needed £200

More to follow.

Post by **Rob Bell** » Fri Jan 16, 2015 1:58 pm

Is it HAM BRG Chris?

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 2:00 pm

Yes rob paint code HAM. Sorry should have said.

Post by **Rob Bell** » Fri Jan 16, 2015 3:03 pm

Might be interested in the bumpers Chris. What other body panels are available?

BTW why being scrapped? Sill rot?

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 3:09 pm

Rob Bell wrote:Might be interested in the bumpers Chris. What other body panels are available?

BTW why being scrapped? Sill rot?

Bumpers are good.

Came to the point no one would come and weld the subframe mounts, the sills also needed done. Martin and tony have been telling me to give it up but thought if I could do the welding then it would be worth it. However for not too much money I can have a mk2 thats hopefully MEMS3 which was what I was after overall.

Every panel is good to go wings have some small rust spots and the bonnet has some dents from an accident in the garage. I do enjoy this forum but its a pain for adding pictures unlike FB group.

Christhurso · Post by **Christhurso** » Fri Jan 16, 2015 9:21 pm

Sorry to hear of Frankienstien's depart!

Are the headlights in good condition?

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 9:23 pm

Christhurso wrote:Sorry to hear of Frankienstien's depart!

Are the headlights in good condition?

Yep headlights good no dramas on last mot.

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 9:25 pm

Just to mention I'm away with work this work so my not respond.

Christhurso · Post by **Christhurso** » Fri Jan 16, 2015 10:06 pm

chrisrigby wrote:
Yep headlights good no dramas on last mot.

Superb! If you're able to advise a price when convenient for yourself that'd be great - thanks in advance.

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 10:38 pm

Chris as your in Scotland I'd guess you'd want them posted. Make me a fair offer mate the bits have got to go I've got so much. PM or add on FB

Martin_Bmth · Post by **Martin_Bmth** » Fri Jan 16, 2015 10:39 pm

It was the humane thing to do Chris.

On the up side you'll be giving another F / TF a new loving home.

Nice exhaust btw.... someone wil be getting a bargain.

Good luck with the sale.

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 10:41 pm

Cheers Martin.... yer I did like the exhaust and very different only good for F's though.

jaydoginvasion · Post by **jaydoginvasion** » Fri Jan 16, 2015 10:49 pm

I like the exhaust, if it's still available at the end of the month and I can get it past the "accountant " I might be interested.

chrisrigby · Post by **chrisrigby** » Fri Jan 16, 2015 10:55 pm

Well I'm back last week of the month so I won't be able to post or get the bits ready for anyone to collect anyway so first come first serve. But I'm sure we can sort something out.

jaydoginvasion · Post by **jaydoginvasion** » Sat Jan 17, 2015 12:52 am

Sounds good Chris, I will check out the finances and see what I can do.

Plezier · Post by **Plezier** » Sat Jan 17, 2015 8:32 am

Sods Law strikes again .................................. why is itt hat every time good deal come along I am broke

The exhaust woud have been the perfect upgrade for "Blue 33"

.

Oh well ............................... I'll just go and curl up in a dark corner and weep!

chrisrigby · Post by **chrisrigby** » Sat Jan 17, 2015 11:29 am

Lol currently driving to france see what happens when im back

chrisrigby · Post by **chrisrigby** » Sat Jan 24, 2015 6:47 pm

Ok so I'm back I will start to strip and sort out the parts tomorrow. Like I said before its all got to go ASAP so bits are on offers I am collecting my new one tomorrow then I can make my decision about which interior the keep. Either the smokestone or full black mk2.

I shall add picture also.

Martin_Bmth · Post by **Martin_Bmth** » Sat Jan 24, 2015 6:59 pm

Once you've gone black theres no going back...... apparently :p

chrisrigby · Post by **chrisrigby** » Fri Jan 30, 2015 9:15 am

Ok all is stripped out and ready for bits to go....

The MGF Register Forums

Frankienstien is dead all parts must go.

Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.

Re: Frankienstien is dead all parts must go.