Rolling Road and Z&F MEMS3 re-tune Day?
Moderator: Committee Members
Forum rules
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
Not many rules really, this board being aimed at technical issues, it shouldn't fall foul (hopefully) of some of the more personal issues that can affect forums.
Rule 1 - Is that you need to think very carefully before posting anything technical or asking anything technical relating to the security system of the car - See 'Security Issues' sticky for more info.
Rule 2 - We (MGF Register) do not support copyright infringement and therefore references to CD ROM, PDF versions or paper copies of the workshop manual (for instance) should not be posted on the forum. We don't want to get into trouble and we'd rather sell you a genuine hard copy through our Regalia shop anyway!
Because advice is honestly and freely given in this technical section, much of it will be amateur experienced based, so any information is given in good faith and is not guaranteed as correct.
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: Rolling Road and Z&F MEMS3 re-tune Day?
You wuss!
Right, I've just had a chat with Bernie and have come up with 3 potential dates, all saturdays:
11th May
1st June
8th June
The latter is the weekend before Silverstone! Crumbs, yet again, the year is flying by!!! Let me know what your availabilities/preferences are. I guess a big decider will be Mark's availability - so I'll drop him an email too.
Lack of funds are currently stalling Project Shed's progress: I can't afford to insure and get new tyres for the old gal right now. Darn it. But I'll put my other F on the rollers as it has been a very long time since it was last "tested"!
Right, I've just had a chat with Bernie and have come up with 3 potential dates, all saturdays:
11th May
1st June
8th June
The latter is the weekend before Silverstone! Crumbs, yet again, the year is flying by!!! Let me know what your availabilities/preferences are. I guess a big decider will be Mark's availability - so I'll drop him an email too.
Lack of funds are currently stalling Project Shed's progress: I can't afford to insure and get new tyres for the old gal right now. Darn it. But I'll put my other F on the rollers as it has been a very long time since it was last "tested"!
- andywatson
- Posts: 121
- Joined: Sat Sep 24, 2011 9:48 pm
- MGF Register Region: Essex
- Model of Car: MGF 1.9 Scholar
Rolling Road and Z&F MEMS3 re-tune Day?
Out of those dates the only one I could make would be 1st June.
- colintf
- Committee Member & Regional Rep
- Posts: 12489
- Joined: Thu Oct 04, 2007 5:49 pm
- MGF Register Region: Devon & Cornwall
- Model of Car: MG PA TF160 ZTV8
- Location: Bristol / Cornwall (back home!)
- Contact:
Re: Rolling Road and Z&F MEMS3 re-tune Day?
None for me but don't worry Rob
Colin Murrell
MGF Register International Liaison Rep
MGF Register Regional Rep for Devon & Cornwall and Cotswold Regions
MGCC Z and V8 Registers Reps for V8 ZT'/ZTTs
http://www.two-sixties.com/main.htm http://www.triple-mracing.com/
- stuart
- Posts: 823
- Joined: Tue Jul 12, 2011 8:43 pm
- MGF Register Region: Hertfordshire
- Model of Car: TF160
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Awesome!
Any of those dates are good for me
Any of those dates are good for me
Stuart
'02 TF 160 - an Original MG Rover Group Press Car...and still lookin' sharp!
Bilstein Shocks, Z&F Remap, B&G Coolant Alarm, Glass Rear Screen, Braided Hoses, Bling-free at the moment...but that'll probably change
'02 TF 160 - an Original MG Rover Group Press Car...and still lookin' sharp!
Bilstein Shocks, Z&F Remap, B&G Coolant Alarm, Glass Rear Screen, Braided Hoses, Bling-free at the moment...but that'll probably change
- Martin C
- Posts: 70
- Joined: Fri Nov 02, 2012 9:37 pm
- MGF Register Region: South Coast
- Model of Car: Mk. 1 1999 VVC
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Hi Rob,
Only date that fits my schedule is June 1st
Only date that fits my schedule is June 1st
Cheers,
Martin
MGs-on-Track - Committee member
1972 Zircon Blue Rover P6 3500S 131bhp
1999 Morrelo - MG F VVC 150+bhp
2003 Nightfire Red - MG ZS 120+ 118bhp
As Wolfie should have said = "X-Power to the people!"
Martin
MGs-on-Track - Committee member
1972 Zircon Blue Rover P6 3500S 131bhp
1999 Morrelo - MG F VVC 150+bhp
2003 Nightfire Red - MG ZS 120+ 118bhp
As Wolfie should have said = "X-Power to the people!"
-
- Posts: 93
- Joined: Fri Jul 23, 2010 3:27 pm
- MGF Register Region: East Anglia
- Model of Car: 2000 MGF VVC
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Only date that fits for me Rob is 1st of June, little bit of bother with a gasket at the moment - mayoinaise anyone!!
2000 MGF VVC pearlescent BRG, 52mm throttle body, Scorpion exhaust, induction kit and hours of fun
- Softly~Softly
- Posts: 377
- Joined: Wed Jun 23, 2010 10:20 pm
- MGF Register Region: South Midlands
- Model of Car: MGF1.8VVC TF135. 160
- Location: Straford upon Avon Warks
Re: Rolling Road and Z&F MEMS3 re-tune Day?
1st or the 8th are fine by me
For all MG/Rover .. MGWW MGWorldWide https://www.facebook.com/groups/midland ... p_activity
-
- Posts: 527
- Joined: Sun Oct 14, 2007 7:15 pm
- MGF Register Region: Elsewhere
- Model of Car: 2006(reg) TF135
- Location: Jersey
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Hi Rob,
The 1st June will be the only one for me.
However, the schedule will be tight as we're dog sitting for some friends and they were not planning to get back to Jersey until Friday the 30th. I will get together with our friends to see if things can be reshuffled a bit, if Mark can make it, that is. If Mark can't make it, then I will pass as the remapping is more important to me.
If I don't get across for the 1st of June (if that's what you end up with) I can meet up with Mark when I'm over July 11th through 16th. We plan to go to the Festival of Speed on the Friday. We will have time Saturday, Sunday and Monday afternoon to do other things as my hospital check up is on the Monday morning at the Southampton General. Then it's back on the ferry Tuesday.
That's the plan!
willyphixitt
The 1st June will be the only one for me.
However, the schedule will be tight as we're dog sitting for some friends and they were not planning to get back to Jersey until Friday the 30th. I will get together with our friends to see if things can be reshuffled a bit, if Mark can make it, that is. If Mark can't make it, then I will pass as the remapping is more important to me.
If I don't get across for the 1st of June (if that's what you end up with) I can meet up with Mark when I'm over July 11th through 16th. We plan to go to the Festival of Speed on the Friday. We will have time Saturday, Sunday and Monday afternoon to do other things as my hospital check up is on the Monday morning at the Southampton General. Then it's back on the ferry Tuesday.
That's the plan!
willyphixitt
- MaddAussie
- Posts: 754
- Joined: Thu Feb 03, 2011 9:16 am
- MGF Register Region: Somerset & Dorset
- Model of Car: TF160
Re: Rolling Road and Z&F MEMS3 re-tune Day?
All of those are good for me mate. Will check with Matt
TF160 - Bilstiens, Mike Satur 4-2-1, Sports Cat, Quad Daytona, Z and F Tuning Phase 2 Remap showing 177Bhp @ Janspeed RR day and a Big Grin (oh and a glass rear screen and bits of shiny stuff) 85th suspension bits to fit!
- adrianclifford
- Posts: 8007
- Joined: Mon Oct 01, 2007 6:56 pm
- MGF Register Region: Essex
- Model of Car: MGTF 80LE
- Location: Leigh on Sea
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Hmm !!
11th May, Anglia Centre event at Stow Maries WW1 airfield
1st June, Anglia Centre committee meeting
8th June, MGCC Switzerland 65th anniversary event in Davos.
11th May, Anglia Centre event at Stow Maries WW1 airfield
1st June, Anglia Centre committee meeting
8th June, MGCC Switzerland 65th anniversary event in Davos.
Bilstein shocks, Piper 4-2-1 manifold, Daytona, Vader cold-air induction, custom Z and F Stage 2 re-map, Electric boot release, braided hoses, Blue Magnecor leads, Technozen relays, Stage 1 head, BMW Angel Eyes headlights, "MG" puddle lights.
- BooBoo
- Posts: 278
- Joined: Fri Jan 06, 2012 4:57 pm
- MGF Register Region: South East
- Model of Car: MGF TF135
- Location: Creepy Crawley
Re: Rolling Road and Z&F MEMS3 re-tune Day?
1st of June is possible for me, but I will need to book time off work (I have to give 3 weeks advance notice for this ) so confirmation soon would be helpful if possible.
2003 TF135 "typhoon" ...a work in progress
Also owner of a V8 4.7 Grand Cherokee , vive la difference
Also owner of a V8 4.7 Grand Cherokee , vive la difference
- nigelandjo
- Committee Member & Regional Rep
- Posts: 4929
- Joined: Tue Oct 09, 2007 9:44 pm
- MGF Register Region: Somerset & Dorset
- Model of Car: TF85th,TF135,Trophy
- Location: Berrow
- Contact:
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Definately can't make 8th June, but the other 2 are probably ok.
Nigel May
Somerset & Dorset Regional Rep, Membership Secretary, Registrar & Archivist
Email: somerset.dorset@mgfregister.org members@mgfregister.org
MGCC Members register here: https://mgfregister.org/?page_id=319
Somerset & Dorset Regional Rep, Membership Secretary, Registrar & Archivist
Email: somerset.dorset@mgfregister.org members@mgfregister.org
MGCC Members register here: https://mgfregister.org/?page_id=319
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: Rolling Road and Z&F MEMS3 re-tune Day?
1st is looking like the overwhelmingly obvious candidate date!!! Mark Stacey has suggested that he can do the 8th. Argh.
The organising of this day is proving difficult as I don't have a huge amount of time at the moment - anyone able to help?
In the mean time, I'll see whether Mark can do the 1st...
The organising of this day is proving difficult as I don't have a huge amount of time at the moment - anyone able to help?
In the mean time, I'll see whether Mark can do the 1st...
- andywatson
- Posts: 121
- Joined: Sat Sep 24, 2011 9:48 pm
- MGF Register Region: Essex
- Model of Car: MGF 1.9 Scholar
Rolling Road and Z&F MEMS3 re-tune Day?
I can give it a go Rob.Rob Bell wrote:
The organising of this day is proving difficult as I don't have a huge amount of time at the moment - anyone able to help?..
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: Rolling Road and Z&F MEMS3 re-tune Day?
I've mailed Mark.
Andy, have you got my mobile number and we'll get this sorted together Thanks
Andy, have you got my mobile number and we'll get this sorted together Thanks
- andywatson
- Posts: 121
- Joined: Sat Sep 24, 2011 9:48 pm
- MGF Register Region: Essex
- Model of Car: MGF 1.9 Scholar
Rolling Road and Z&F MEMS3 re-tune Day?
Rob, can you PM your number and a convenient time to phone.
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: Rolling Road and Z&F MEMS3 re-tune Day?
I have now spoken to Bernie. Good news is:
MGF Register Rolling Road Day
Saturday 1st of June, 2013
Mark Stacey from Z&F Tuning for re-mapping of MEMS3 cars
Numbers limited to 10-12 cars
3 runs per car, at £35 per car
(re-mapped cars returning for a repeat power run will have to pay a little more: we're going to work this out and let you know)
I think the fairest way we can do this is to offer places on a first come, first serve basis, with deposits paid. I'm thinking a £15 deposit?
MGF Register Rolling Road Day
Saturday 1st of June, 2013
Mark Stacey from Z&F Tuning for re-mapping of MEMS3 cars
Numbers limited to 10-12 cars
3 runs per car, at £35 per car
(re-mapped cars returning for a repeat power run will have to pay a little more: we're going to work this out and let you know)
I think the fairest way we can do this is to offer places on a first come, first serve basis, with deposits paid. I'm thinking a £15 deposit?
- Bigfootmgf
- Posts: 1281
- Joined: Wed Oct 10, 2007 2:54 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8
- Location: Egham Surrey
- Contact:
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Do you know what time this is going to be as i am busy that morning?
Paul
Mod's cost money that you don't have or you could have if you did not have mods!
Bigfootmgf youtube Channel
SE MGF Facebook page
Mod's cost money that you don't have or you could have if you did not have mods!
Bigfootmgf youtube Channel
SE MGF Facebook page
- Rob Bell
- Committee Member
- Posts: 14438
- Joined: Tue Oct 02, 2007 2:36 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8i + MGF Shed!
Re: Rolling Road and Z&F MEMS3 re-tune Day?
Details of the Novatech Rolling road (http://www.novatech.info/index.html):
Novatech
146 Edinburgh Avenue
Slough Trading Estate
Berkshire
SL1 4SS
Telephone 01753 521555
Novatech
146 Edinburgh Avenue
Slough Trading Estate
Berkshire
SL1 4SS
Telephone 01753 521555
Time-wise, I'd imagine from 10.00 onwards going into late afternoonBigfootmgf wrote:Do you know what time this is going to be as i am busy that morning?
- Bigfootmgf
- Posts: 1281
- Joined: Wed Oct 10, 2007 2:54 pm
- MGF Register Region: South East
- Model of Car: MGF 1.8
- Location: Egham Surrey
- Contact:
Re: Rolling Road and Z&F MEMS3 re-tune Day?
I would not get there till about 12noon but if thats ok can you put me down?(I only live in Egham so 15mins away)
Paul
Mod's cost money that you don't have or you could have if you did not have mods!
Bigfootmgf youtube Channel
SE MGF Facebook page
Mod's cost money that you don't have or you could have if you did not have mods!
Bigfootmgf youtube Channel
SE MGF Facebook page